Qingdao Pantech Environmental Protection Technology Co

1.
Function
The type welding fume purifier is a purification device specially designed for industrial welding fume and light particles. It is light, flexible and easy to operate. It is also widely used in Chemical industry, electronics, metal processing, tobacco, glass, pharmaceutical, food processing, clean room industry and other places with dust and smoke pollution.
2. Working Principle
Fume
The negative pressure smoke generated by the fan is sucked in by the suction hood, and enters the cavity through the flexible suction arm. The flow rate slows down so that dust with large particle diameters falls out. Falling down, the airflow containing fine dust enters the clean room. The filtration and separation of dust is completed in the clean room through the separation of the filter cartridge. The smoke and dust are blocked on its surface by the filter element. The purified air is discharged through the fan. When the blocked smoke and dust When the surface of the filter element continues to accumulate, the pulse cleaning system is turned on regularly. For manual cleaning, the filter cartridge needs to be taken out and cleaned manually. The electrode plate needs to be cleaned regularly when there is static electricity.
3. Product structure and technical data structure characteristics
The welding smoke purifier consists of a centrifugal fan, a cartridge filter chamber, or an electrostatic plate purification cabin, a dust collection drawer, a purifier chamber, and pulse cleaning Or manual dust cleaning, consisting of electronic control device and flexible suction arm with dust collector cover.
, The welding fume purifier uses a cartridge filter with a large filtering area and low filtering flow rate per unit area, so it has high filtering efficiency.
, the welding fume purifier adopts an optimized design and adopts air inlet equalization and diversion technology, which solves the phenomenon of uneven air flow in each chamber that is unavoidable in general bag dust collectors.
, The air flow organization design of the welding fume purifier is reasonable, the resistance loss is small, the machine has a compact appearance, flexible movement, simple operation and convenient maintenance.
, the filter cartridge adopts imported high-efficiency filter material, and the filtration efficiency reaches
.
The service life of the filter cartridge is much longer than that of ordinary filter materials under normal use conditions.
, a uniform air deflector is used in front of the high-efficiency filter cartridge to greatly extend the life of the filter cartridge.
, The suction arm of the welding fume purifier can be rotated
and can move up, down, left and right.
Welcome to order
4. Maintenance Instructions
During the processing process, the equipment of this project shall be carried out in accordance with the workshop production equipment specifications, while ensuring the safety of production and stable operation for each part and system. After many experiments, it was put into use. The equipment itself has no wearing parts, so no special attention is required during use. Each system has added safety protection when the equipment is completed. Equipment consumables are provided by our company and replaced on site. At the same time, our unit can provide consumables, which can be replaced by the workshop operators themselves after turning off the power.